Product Overview
BC133A-E072A1-01 is an EC centrifugal fan with a 115 Vac input, delivering 450 m³/h at up to 500 Pa, 50 W, 4500 r/min, 74 dB(A). Used in AHUs, fan coils, range hoods, air purifiers and ERV units. USD 30–68 FOB Nansha, MOQ 576 pcs, 25–30 days.
- Compact industrial housing (IP54)
- Long-life NSK ball bearings
Mounted on a support bracket without a volute, the BC impeller also works as a plug fan (plenum fan) inside AHU sections and cabinet plenums, where the casing is built by the unit manufacturer.
Selection notes
BC133A-E072A1-01 belongs to the BC133 range: a EC centrifugal fan rated 115 V AC, 450 m³/h at up to 500 Pa, 4500 r/min. Speed is set through 0-10V/PWM, 3-speed; the datasheet sound pressure is 74 dB(A).
Duty point: 450 m³/h at 500 Pa. Because speed can be trimmed through 0-10V/PWM, 3-speed, the same unit can be re-set on site if the measured system resistance differs from the design value. For the destination market the grid is typically 110–240 V, 50/60 Hz, with CE, UL/ETL or CCC depending on destination as the compliance framework.
Technical Specifications
| Category | Centrifugal Fan |
|---|---|
| Model | BC133A-E072A1-01 |
| Motor Type | EC |
| Airflow | 450 m³/h |
| Max Static Pressure | 500 Pa |
| Voltage | 115 V AC |
| Power | 50 W |
| Current | 0.43 A |
| Speed | 4500 r/min |
| Noise | 74 dB(A) |
| Protection Class | IP54 |
| Working Temperature | -25 °C ~ +60 °C |
| Impeller Material | PA6+GF25% |
| Bearing Type | NSK ball bearing |
| Speed Control | 0-10V/PWM, 3-speed |
Data updated 2026-10
Ordering Information
| MOQ (Min. Order Qty) | 576 PCS |
|---|---|
| FOB Price | FOB Nansha Guangzhou |
| Reference price | US$30–68 |
| Lead Time | 25-30 days |
| Sample | Sample available |
| Payment Terms | TT |
| Shipping Port | Nansha Guangzhou OR Yantian Shenzhen |
Other Models in This Series
Performance Curves
Dimensions (No.1)
Special Remarks
Impeller material: PA6+GF25%
Applications
Compact 133 mm backward-curved EC centrifugal fans that deliver 450–480 m³/h at 500–580 Pa — high pressure from a palm-sized frame. Duty: dense electronics cabinets, laser and power-supply cooling, compact air curtains. 115/230 V AC, 0-10V/PWM and 3-speed, IP54.
Product dataSheets (PDF Download)
View Product dataSheets (PDF) PDF · EC·Centrifugal fan:BC133A-E072A1-01 Product dataSheetsFrequently Asked Questions
Forward-curved or backward-curved centrifugal — which one fits my duty?
Forward-curved (squirrel-cage) wheels are compact and cheap, but they peak at low pressure and their power keeps rising with airflow. Backward-curved wheels like the BC133’s sustain higher static pressure (500–580 Pa here), hold efficiency over a wider band, and their power curve is non-overloading. Rule of thumb: above roughly 300 Pa of system resistance, or continuous duty, favors backward-curved.
How do I find the actual operating point from the fan curve?
Draw your system curve — resistance rises with the square of airflow (P = k·Q²) — and lay it over the fan’s P-Q curve. The intersection is the operating point; check it sits to the right of the fan’s pressure peak, where the curve is steep and stable. Then read power and noise at that point, not at the catalogue maximum.
Can I drive the EC version straight from a room thermostat or BMS?
Yes. The EC input takes 0-10V or PWM — map it to whatever the controller outputs: a simple thermostat gives high/low, a BMS gives full modulation. Set a minimum-speed floor so the fan never stalls or hunts at tiny signals; below about 20% command most systems gain nothing but noise and heat.