BC190 Series

Rated noise across the BC190 series spans 62–71 dB(A) depending on model and size. Because noise follows speed, the easiest way to reduce sound levels is to choose a smaller model at a lower speed for the same airflow, or a speed-controlled EC/DC version where available — ideal for noise-sensitive environments such as offices, laboratories and residential ventilation.

Models in the BC190 series use NSK ball bearings, which supports continuous-duty operation in HVAC and industrial ventilation. Bearing life depends mainly on operating speed and temperature: keeping inlet air clean, avoiding vibration and running at moderate speeds maximise service life. For an L10 life estimate at your exact operating point, contact our engineering team.

Protection classes in the BC190 series include IP54. Models rated IP54 seal the motor against dust and splashing water for typical industrial environments; for outdoor or wash-down installations, choose the highest IP rating available in the series and avoid direct high-pressure water jets. The standard operating temperature range is -25 °C ~ +60 °C.

Start from the airflow you need — the BC190 series covers 530–780 m³/h. In this series, DC models suit battery- and solar-powered systems. EC models offer stepless speed control and the best efficiency at partial load. The comparison table on this page lists airflow, voltage, power and noise for every model, or send us your operating point (airflow and static pressure) and our engineers will size the right model for you.

Standard MOQ is 160 PCS per model, with a typical lead time of 25-30 days. Samples are available for evaluation before volume orders. OEM/ODM customization — private labels, connectors and speed curves — is supported at our Foshan factory.